Kurzweil PC88 - Using the Sound Set; Selecting the Sound Set

Chapter
1
Basic
Operation
Use the MIDI In to receive up to 16 separate channels
of MIDI data into the PC88. The PC88's MIDI Out can send
up to four channels simultaneously.
The MIDI Thru/Out has two functions. To the left of
the MIDI In jack there is a MIDI Select switch. The MIDI
Select is a slide switch which allows you to select either
MIDI Thru or Out. In the Thru position, it allows you to
send data being received by the PC88 through to multiple
MIDI instruments. In the Out position, it doubles as a
second MIDI Out jack which allows you to hook up
multiple instruments.
LCD Contrast Adjustment
Located between the MIDI and the Switch Pedal jacks is.
a rotary knob. Turning the knob adjusts the LCD to
accommodate different playing positions.
Switch Pedals
There are two jacks on the rear panel for switch pedals.
The pedals should have two-conductor 1/4" plugs. Either
normally on or normally off switches can be used. They
are typically used for on/off operations such as sustain,
sostenuto, etc.
=. oo meme’ ONtinuous Controt — emesis AUCIO QUIS es
Lett Lat (More) pace "Headphones
Continuous Control Pedals
There are jacks on the rear panel to connect up to four
external control pedals. The pedals should have 10kQ
linear taper potentiometers with 1/4" tip/ring/sleeve
plugs. They can be used for volume, stereo pan, etc.
PC88 Service Manual
1-2