Kurzweil PC88 - Working with Sounds; Articulations and Techniques

Chapter 1 Basic Operation
Zone Parameters
To the right of the LCD are two rows of six buttons.
The top row is used to access parameters within each of
the four zones for a Setup. The bottom row is used for
controlling Setup parameters, global settings and memory
functions. Each button in the bottom row opens up a list
of parameters.
one Parents
Arpeggiaior Elects MIDI Racers Global Copy Sore
The Global button is especially important to servicers.
Entering the Global menu will allow you to save the
customer's setups, reset the PC88 and enter MIDIScope. It
will also allow you to check the available memory and
"All Notes Off" command, etc.
Zone Select and Assignable Controllers
To the left of the LCD are the four Zone buttons,
labelled 1 through 4. The Zone buttons 1 through 4 are
only operative in the MIDI Setups mode. When you are
in the Internal Voices mode, only Zone 1 is used.
Zone 1 Zone 2 Zone 3 Zone 4 Solo
PC88 Service Manual
1-5