Kurzweil PC88 - Page 16

Chapter 1 Basic Operation
Each button has a three color LED. A green LED is lit
when the zone is on or active, an orange LED when it is
muted and a red LED when it is being soloed.
The Solo button to the right of the Zone buttons mutes
all zones except the current one. Pressing the Solo button
will turn the Zone button'’s LED red indicating that the
zone is being soloed.
Located beneath the Zone buttons are four sliders
labelled A through D and three buttons, labelled E, F and G.
These sliders and buttons along with the two wheels to
the left of the keyboard can all be assigned to different
MIDI functions. The buttons can be designated to work as
momentary as well as on/off.
The sliders, buttons and wheels are shipped from the
Factory with default settings. However, they are all
assignable on a per zone basis. They not only have the
capability of doing different things in different setups, they
may also do different things within a setup.
Data Entry
The Data Entry section contains the Alpha Wheel, the
Decrement/Increment buttons and the Numeric Keypad.
STU
YZ
Space
VWX
0-9
UPPERAower
_ +
The Alpha Wheel is used to quickly move through
voices and setups. In the Parameter mode, you can
quickly move through parameters.
PC88 Service Manual
1-6