Kurzweil PC88 - Page 17

Chapter 1 Basic Operation
The decrement/increment buttons complement the
Alpha Wheel. Once you are in the vicinity you need to
be, the decrement/increment buttons allow you to make
small adjustments. In Parameter mode, pressing both
buttons simultaneously will bring you back to the default
setting.
The Number keypad is useful when you know exactly
what voice, setup or parameter you wish to choose.
Simply press the numbers you want and press Enter.
The Enter and Cancel buttons also act as Yes and No
for when the display asks you a question.
The +/- button is used to enter negative numbers.
When entering program numbers, it is also used to add a
separator between the bank and program numbers.
As you can see, the numeric keypad can also be used as
an alphabetical keypad. This is used to name setups.
Master Volume
The Master Volume Slider is located at the far left end
of the control panel. It controls volume for the main
outputs and the headphones. The Master Volume is not
programmable and and does not generate MIDI Volume
commands or data.
Panic Button
The Panic button is located to the left of the Alpha
Wheel.
Pressing the Panic button basically stops all sound
produced by the PC88 and any other MIDI device
connected to it. It also sends "All Notes Off" and "Reset
All Controllers" MIDI messages on all 16 MIDI channels.
PC88 Service Manual
1-7
a ES
on