Kurzweil PC88 - Dynamics Control

Chapter 1
Basic Operation
Effects
The three Effects buttons located beneath the Panic
button control the following:
Effects
Wl Room MB Bright mm Chorus 1
GH Stage WE Normal @ Chorus 2
7 tel GB Warm ME Delay
The first Effects button selects the type of the Reverb:
Room, Stage, or Hall You will see the LED light up as you
select the variations. Reverb is off, when no LEDs are lit
The second Effects button controls the tone of the
Reverb: Bright, Warm or Normal. You will see the LED
light up as you select the variations. Reverb is off when
no LEDs are lit.
The third Effects button selects the Chorus or Delay
effect: Chorus 1, Chorus 2 or Delay. You will see the LED
light up as you select the variations. Reverb is off when
no LEDs are lit.
PC88 Service Manual
1-8