Kurzweil PC88 - Page 54

Chapter 3 Disassembly/Assembly
Enclosure Support Wall
Opening the PC88
Prior to opening the PC88, remove power and all
external wires and cables.
Place the PC88 upside down on a soft surface. Refer to
the illustration below and locate the 9 Phillips head screws
indicated.
Figure 3.7
Enclosure Support Wall Screws
REMOVE
Rear Panel
Keyboard
Keyboard Screws
Do NOT Remove
Remove the 9 screws labelled A. Turn the unit over
into playing position.
PC88 Service Manual
3-18