Kurzweil PC88 - Page 80

Chapter 3 Disassembly/Assembly
B. Place the new key weight into position.
You will need to file the end of the rod so that it is
smooth and can be inserted through the key
weights. Work the filed end of the rod through the
key weights. Turning the rod makes this process
easier.
Each key weight has a strip of red felt attached to the
key weight with pliable adhesive. Be sure the red
felt extends onto the upper surface of the top of the
key weight. Be careful that when the rod is
inserted, it does not "bunch up" the red felt.
Prior to installing the keys and springs, check that
each key weight moves freely.
PC88 Service Manual
3-44