3
Thank you for purchasing a PCR-1 or PCR-2 ROM Expansion
Kit. Please read all of the introductory information in this
document (through
Tools and Materials Required for
Installation
) before proceeding with the installation. Then,
depending on the model you have, turn to
Installing in
Keyboard Models
on page 9, or
Installing in Rack-Mount Models
on page 17. Finally, go to
Updating Software
on page 26 to
determine which components of your PC2’s software you
need to update.
PCR-1
The PCR-1 adds 264 programs and 32 setups to the PC2
series, including an extensive collection of orchestral
samples: strings, winds, brass, percussion, vocals, organs,
and ensembles. A complete set of General MIDI 1 programs
is included, too.
Once you’ve completed the hardware installation (one or
more circuit boards), you can install the software portion of
this option into ROM in one of two ways:
• As a collection of orchestral programs and setups with
customized performance controls (the Orchestral set)
• As a General MIDI 1 set that conforms to the General
MIDI 1 standard for program IDs and note assignments
(the GM set)
Whichever set of programs you decide to install into ROM,
you can always load the other set of programs into RAM if
you want both sets to be available at the same time. And of
course, you can reinstall into ROM as often as you like, so
you can change your mind about which set of programs you
keep in ROM.
PCR-2
The PCR-2 provides an array of classic keyboard sounds, and
adds 128 programs and 32 setups to your PC2.
To Next Page
Loading...
Need help?
General