Kurzweil SP7 - Page 4

4
Quick Start GETTING STARTED GUIDE
LCD firmware update2.
Firmware Download
Download the latest firmware file for the SP7 from the Kurzweil website.
Download the current update kit from http://kurzweil.com -> DOWNLOADS -> select the SP7 ->
Select DOWNLOADS -> Download the latest update kit posted and save it to your computer and
unzip it.
Copy the folder named [upgradeSP7] into the root directory path of the SD card. Do not rename
the files or folder.
1.
2.
3.
Firmware Download
Insert the SD card into the SP7 SD card slot (located on the rear panel).
Press the [GLOBAL] button on the front panel to enter Global Mode.
Select the Info tab on the left side of the LCD screen.
Select the [LCD Firm Update] button under the current firmware version.
When the update page appears on screen, press the [UPDATE] button to start the update.
After the update is complete, remove the SD card and reboot.
1.
2.
3.
4.
5.
6.
You can update the firmware of the front panel LCD display via SD card.
Requirements
SD Card Recommended specifications
This process requires the SP7, a computer and an SD card.
Card spec
SDHC
Format type
FAT32
Speed
4C ↑
Memory
16GB ↑