Front Panel GETTING STARTED GUIDE
There are eight control knobs located just to the left of the display. The adjusted values of the
various parameters are displayed on the screen. The knobs are initially preset to EQ Lo, EQ Mid Lo, EQ Mid Hi,
EQ Hi, Delay Time, Delay Level, Reverb Time, and Reverb Level but are also customizable to parameters of your
choosing.
Control Knob
There are 8 customizable colored buttons located just beneath the control knobs.
They act as zone mutes by default but, similar to the knobs, they can also be reassigned to control various
custom functions.
Zone Buttons
The CURSOR buttons are the five buttons below the display, each of which has the function of moving the
cursor left/up/down/right and selecting a given field.
You can use the cursor buttons to move to any position on the LCD screen, select a function with the Select
button, and then use the ALPHA WHEEL or [DECREASE-]/[INCREASE +] buttons to change the parameter
value of the currently selected function.
Note: The arrow keys and select key do not have LED lighting.
Cursor Buttons (Arrow / Select buttons)
The large dial-type wheel allows you to conveniently adjust parameters in detail.
Alpha Wheel
The Increase/Decrease buttons are used to change the selected onscreen parameter value In controlled, single
increments.
Decrease (-)/Increase (+) Buttons
The Mode buttons are used to navigate the SP7 four operating modes: FAVORITES, SOUND, AUDIO, and
GLOBAL.
Mode Buttons
6
To Next Page
Loading...
