Kuschall CHAMPION User Manual (English)

Other manuals for Kuschall CHAMPION

User Manual56 pages

Quick Start Guide2 pages

Questions and Answers:

M
Mrs. Carmen LaneSep 10, 2025
Why Küschall Wheelchair does not travel in a straight line?
- J
  James HayesSep 10, 2025
  If your Küschall Wheelchair isn't moving straight, several factors could be at play. It might be due to incorrect tire pressure in one of the rear wheels. Unevenly tightened or broken spokes could also be the cause. The front wheel bearings might be dirty or damaged, or the rear wheels could be off track. Also, check if the bearing block of the front wheel is not in a vertical position or if the front wheels are not adjusted to the same height. Correcting the tire pressure can resolve the issue. For other causes, it is best to consult with a specialist.
A
Angela BridgesAug 22, 2025
Why does my Küschall Wheelchair have very high rolling resistance?
- S
  Sandra HerreraAug 23, 2025
  If you are experiencing very high rolling resistance with your Küschall Wheelchair, it could be due to low tire pressure in the rear tires. Correct the tire pressure to resolve this. Another potential cause is that the rear wheels are off track, in this case change the track.
E
eddie91Aug 25, 2025
What to do if Küschall Wheelchair wheel locks are gripping poorly?
- J
  Joseph MillerAug 25, 2025
  If the wheel locks on your Küschall Wheelchair are gripping poorly or asymmetrically, it may be due to incorrect tire pressure in one or both rear tires. Correct the tire pressure to solve this. Another possible cause is an incorrect wheel lock setting; in this case, correct the wheel lock setting.
N
Nicole TorresAug 26, 2025
Why does Küschall Wheelchair tip backwards easily?
- C
  Catherine KerrAug 26, 2025
  If your Küschall Wheelchair tips backwards too easily, it might be because the rear wheels are mounted too far forwards, in this case, mount the rear wheels further back. Alternatively, the back angle might be too large, reduce the backrest angle. A further cause may be that the seat angle is too large, use longer vertical struts.
D
Dana ParkAug 27, 2025
How to stop front wheels wobbling on Küschall Wheelchair?
- D
  dgonzalezAug 27, 2025
  If the front wheels of your Küschall Wheelchair wobble when moving fast, it could be due to too little tension in the front wheel bearing block. To fix this, tighten the nut on the bearing block axle slightly.
H
hamptonamandaAug 29, 2025
What to do if Küschall Wheelchair is very difficult to unfold?
- S
  sharonliAug 29, 2025
  If your Küschall Wheelchair is very difficult to unfold, it could be because the backrest cover is too tight. Try loosening the Velcro bands of the backrest cover a little. Another possible cause is that the folding mechanism is adjusted too hard; in this case, adjust the folding mechanism.
J
Joshua AndersonSep 15, 2025
Why Küschall Wheelchair tips backwards too easily?
- J
  Jorge BurkeSep 15, 2025
  If your Küschall Wheelchair tips backward too easily, it might be because the rear wheels are mounted too far forwards, or the back angle or seat angle is too large. To address this, you can adjust the rear wheels further back. For other causes, it is best to consult with a specialist.
P
Peter RamosSep 12, 2025
Why Küschall Wheelchair rolling resistance is very high?
- E
  edwin74Sep 12, 2025
  High rolling resistance in your Küschall Wheelchair can be due to a couple of reasons. First, check the tire pressure in the rear tires, as low pressure can significantly increase resistance. Also, ensure that the rear wheels are correctly aligned. Correcting the tire pressure can resolve the issue. For other causes, it is best to consult with a specialist.
J
Joseph SandersSep 8, 2025
Why is my Küschall Wheelchair very difficult to unfold?
- S
  swallSep 8, 2025
  If your Küschall Wheelchair is very difficult to unfold, it could be because the backrest cover is too tight. Loosen the hook and loop straps of the backrest cover a little. It might also be that the folding mechanism is adjusted too hard, so adjust the folding mechanism.
W
wallaceveronicaSep 5, 2025
What to do if removable axles cannot be inserted correctly in Küschall Wheelchair?
- S
  schroederashleeSep 5, 2025
  If you find that the removable axles cannot be inserted correctly into your Küschall Wheelchair, it might be because the removable axles are dirty. Clean the removable axles. It could also be that the removable axles are misaligned, so adjust them. Another cause could be incorrect tire pressure in one or both rear tires, so correct the tire pressure.