Need help?Do you have a question about the Kustom Signals Pro-Lite and is the answer not in the manual?
General| Type | Handheld Radar |
|---|---|
| Operating Frequency | K-band (24.150 GHz) |
| Speed Range | 10 to 200 mph |
| Accuracy | ±1 mph |
| Operating Modes | Stationary, Moving |
| Power Source | Rechargeable battery (NiMH) |
| Operating Temperature | -22°F to +140°F (-30°C to +60°C) |
| Display | LCD |
| Dimensions | 24.1 cm x 8.9 cm x 19.1 cm |
| Antenna Type | Horn |
Overview of Pro-Lite features and improvements for law enforcement.
Details of buttons: LCD, Fire/On/Enter, Test/Arrow, Mode/Arrow, Menu/ESC.
Description of Aiming Sight and I/O Connector.
Information on the mounting screw for tripod or lanyard attachment.
Detailed explanation of the Fire/ON/Enter trigger functions and auto-unlock.
Description of the Test/Arrow button for self-tests and menu navigation.
Explanation of the Mode/Arrow button for mode switching and menu navigation.
Details on the Menu/ESC button for menu access, navigation, and exiting.
Description of the LCD's capabilities for speed, range, menus, and alerts.
Explanation of the HUD's dual role in aiming and displaying speed/range data.
How the HUD displays information during self-test, transmission, and speed determination.
Specific HUD display behavior for the Pro-Lite single-shot version.
HUD display behavior for the Pro-Lite Plus tracking history version.
Alert indication when internal battery voltage drops below 2.0 volts.
Warning for voltage below 1.8 volts, indicating imminent power loss.
Factors for setting up the Pro-Lite for accurate speed or distance measurements.
Discussion of the cosine effect and its impact on speed measurement accuracy.
How visibility conditions and windshields affect Pro-Lite performance.
Optional accuracy check using differential distance measurements.
Overview of the stopwatch feature for calculating average speed.
Description of the self-test sequence including Indicator, Accuracy, and Program Memory tests.
How the Pro-Lite displays its installed software version.
Indication of units (Feet/MPH or km/h) during start-up.
The initial mode and display upon powering up the unit.
How to toggle between Speed and Range modes using the Mode/Arrow button.
Using the Menu/ESC button to access setup and operating features.
Procedure for setting the minimum range for speed display.
Procedure for setting the maximum range for speed display.
How to adjust the LCD backlight for visibility.
How to adjust the audible alert volume using arrow keys.
How to adjust the HUD brightness for optimal viewing.
Procedure for testing range measurement accuracy against known distances.
Detailed procedure for the differential distance accuracy test.
Further steps and calibration check for the differential distance test.
Step-by-step guide for measuring speed using the Pro-Lite.
How to operate the Pro-Lite to measure target range.
Specifics for Pro-Lite Plus range measurements and limitations.
How to enter the stopwatch mode and select units.
How to enable or disable audio alerts for stopwatch functions.
How to measure distance for stopwatch calculations.
Completing distance measurement and audio control for stopwatch.
Illustration and guidance for correct AA battery insertion.
Recommendations for handling and storing the instrument to prolong its life.
Safety precautions and classification of the Pro-Lite as a Class I laser device.
To Next Page
