Kustom KG212FX - Specifications; Output Power and Speaker; Gain, Noise, and Effects; Power Requirements and Dimensions

Kustom
®
KG212FX Specications
Output Power
30 Watts
8 Ohms at 5% THD
Speaker
2 x 12” ST112 16 Ohm 30 watt speakers
Input Impedance
470K
Hum & Noise
-56dB Residual noise, all level controls 0%
(minimum)
Lead Gain
96 dB Lead Gain and Volume controls full
70 dB Lead Gain and Volume controls half way
Clean Gain
60 dB
Clean volume control full
45 dB
Clean volume control halfway
Nominal Signal to Noise
75 dB
Volumes and Gain halfway
Footswitch
Channel Select
Kustom “”KAC-FS100”” recommended,
but any single button alternate contact
LED or Non LED type OK.
Effects
4 selectable digital effects
Reverb, Delay, Chorus/Reverb, Chorus/
Delay
Power Requirements
USA/Canada
120VAC/60Hz, 60W
Europe
230VAC/50Hz, 60W
UK
230VAC/50Hz, 60W
Australia
240VAC/50Hz, 60W
Japan
100VAC/50-60Hz, 60W
Dimensions/Weight
mm/Kilogram 495 (Height) X 666 (Width) X 235 (Depth),
15.1 Kilogram
Inches/Pounds 19.5 (Height) X 26.2 (Width) X 9.3 (Depth),
33.33 Lbs
kustom.com