What to do if juice is not being produced and pulp is backing up in my Kuvings NJE-3520U Juicer?
If you notice that juice is not being produced and pulp is backing up in your Kuvings Juicer, it might be because you are adding too many ingredients at once. To resolve this, stop adding produce and cycle the operation between 'FORWARD', 'STOP', and 'REVERSE' several times to unclog. To prevent this problem in the future, add food more slowly.
How to troubleshoot when the motor does not work in my Kuvings NJE-3520U?
If the motor of your Kuvings Juicer does not work, check that the unit is plugged in correctly and your outlet has power.
Why is part of the drum cap blocked during juicing with my Kuvings Juicer?
If part of the drum cap is blocked during juicing with your Kuvings Juicer, it means that pulp is clogged in the drum cap. To solve this, juice food with high fiber to unclog the pulp.
What to do if the strainer does not separate the juice in my Kuvings Juicer?
If the strainer does not separate the juice in your Kuvings Juicer, it may be because you are adding ingredients too fast into the chute, which can clog the strainer. Use the reverse button to unclog the food and disassemble the unit to clean the strainer before further use.
Why is my Kuvings Juicer yielding wet pulp?
If your Kuvings Juicer is yielding wet pulp, combine produce with low fiber, like carrot, with high fiber, like kale, to decrease the moisture content of the pulp and increase juice yield. Also, try to avoid using the pusher.
Why is the amount of juice less than normal with my Kuvings Juicer?
If the amount of juice is less than normal when using your Kuvings Juicer, remember that juice production depends on how fresh the produce is. To increase yield with older produce, try soaking it in water before juicing.
What to do if, when juicing grapes, the skin is not ejected in my Kuvings Juicer?
If, when juicing grapes with your Kuvings Juicer, the skin is not ejected, it may be because the grape skin is clogging the strainer. To solve this, use the mincing nozzle for better results. You can also insert one or two pieces of carrot to unclog during operation.
What to do if the auger stops during use in my Kuvings Juicer?
If the auger stops during use in your Kuvings Juicer, unplug and disassemble the juicer to check if anything is clogged in the auger.
Why do I have poor results when making noodles with my Kuvings NJE-3520U Juicer?
If you experience poor results when making noodles with your Kuvings Juicer, ensure the dough is not too watery. You might also try oiling the auger.
Why is the auger grinding/wearing in my Kuvings Juicer?
If you notice the auger is grinding or wearing in your Kuvings Juicer, avoid running the juicer for long periods when it is empty.
General| Model | NJE-3520U |
|---|---|
| Category | Juicer |
| Type | Slow Juicer |
| Motor Power/Wattage | 240W |
| Frequency | 60Hz |
| Juicing Speed | 80 RPM |
| Speed Settings | 1 |
| Juice Extraction System | Cold press |
| Feed Chute Size | 75 mm |
| Color | Silver |
| Warranty | 10 years |
| Material | Plastic, Stainless Steel |
To Next Page
