25
24
OPTIONAL
|
HOW TO USE THE BLANK STRAINER
* Dissemble is opposite of Assemble.
Insert the blank strainer into the juicing bowl
while aligning the red dots
●
of the blank strainer
and the juicing bowl.
Insert the juicing screw into the blank strainer
with a twisting motion.
Place the lid onto the juicing bowl by aligning the
red dots
●
of the lid and the juicing bowl. Then,
rotate the lid clockwise until the lid is secured.
Before use, make sure the silicone cover is correctly in place.
* use the same
juicing screw from
the Solw Juicer
Lid
Juicing Screw
Blank Strainer
Juicing Bowl
To assemble the top set, place the juicing screw
and the blank strainer in the juicing bowl and
close the lid.
①
②
③
When using the blank strainer,
always leave the Smart Cap open.
Place the assembled top set onto the base.
Align the arrow
▼
from the lid with the
OPEN sign from the base and rotate the
topset clockwise until the arrow
▼
from
the lid is in
CLOSE position.
Base
Top Se t
HOW TO CLEAN THE SILICONE COVER
Carefully place the silicone cover
by aligning grooves and wedges.
TIP
|
The silicone cover is removable for cleaning.
After cleaning, place the silicone cover on
as shown in the picture.
The blank strainer is used only with frozen ingredients. Depending on the different
ingredients, allow the frozen items to thaw for 5 to 20 minutes before use. Slowly
process a smaller amount per batch.
CAUTION
※
Do not use ice or process ingredients containing vegetable or animal oil.
It may cause a malfunction.
※
Remove hard seeds from the ingredients and peel the skins from the ingredients
before juicing.
1
1
1
2
To Next Page
Loading...
Need help?
General
