Need help?Do you have a question about the Kuvings Witt B6200 and is the answer not in the manual?
General| Power | 240 W |
|---|---|
| Pulp Container | Yes |
| Juice Container | Yes |
| Warranty | 10 years |
| Speed Settings | Single Speed |
Details the process for assembling the top section of the juicer.
Explains how to connect the assembled top section to the juicer base.
Connect the power cord and prepare ingredients before operation.
Initiate operation by pressing the FORWARD button for mastication.
Insert prepared ingredients one piece at a time into the juicer.
Utilize the smart cap for mixed juices, drip prevention, or rinsing.
Turn off the juicer after all juice and pulp extraction is complete.
Provides instructions for a quick rinse of the juicer parts.
Hold the cleaning tool and insert the strainer until it clicks.
Rotate the cleaning tool and strainer in opposite directions under running water.
Thoroughly rinse the inside and outside of the strainer under running water.
After cleaning, remove the strainer from the tool and dry before storing.
Troubleshoot issues related to the juicer not receiving power.
Address causes and solutions for obtaining less juice than expected.
Learn how to reduce the amount of pulp found in the extracted juice.
Find solutions for the juicer stopping unexpectedly during use.
Steps to take if the drum lid becomes stuck and cannot be opened.
To Next Page
