TYPE 9101 07/2014 4
The TYPE 9101 appliance has been designed for solid fuel combustion in periodic feed rates and
is intended for cooking in households and/or for heating the space in which it is situated, accor-
ding to the ČSN EN 12815:2002 Standard as amended by A1:2005. The appliance can be con-
nected to a chimney from the back, both sides or from the top by means of a hole in the hob-top
(Figure 1).
The appliance is suitable for short operational periods, so it is not possible to set the permanent-
heat process with a shortest interval of fuel supply of 10 hours.
Appliance TYPE 9101
Nominal heat output (NHO) wood coal
• summer mode 6 kW 6 kW
• winter mode 6 kW 6 kW
Efficiency with NHO 73,3%
Average flue gas temperature with NHO 275°C
Flue gas mass flow rate with NHO 8,3 g/s
Average concentration of CO with NHO (with O
2
= 13%) 0,11 %
Minimum chimney draught 12 Pa
Working surface height (distance from floor to hob top panel) 850 mm
Appliance width 325 mm
Appliance depth 620 mm
Exhaust branch diameter 120 mm
Height to flue centre 700 ± 0.5 mm
Hob-top panels area 0.12 m
2
Tested fuel wood: size 200-265 mm
Average wood consumption 2 kg/h
Weight 100 kg
Dimensions of the Fire Box
Width x Height х Depth (summer regime) 190 х 220 x 270 mm
Width x Height х Depth (winter regime) 190 х 360 x 270 mm
Fire grate, Width х Depth (upper) 185 х 285 mm
Fire grate, Width х Depth
(bottom) 140 х 240 mm
Stokehole, Width x Height 192 х 130 mm
Accessories
Poker 1 piece
To Next Page
Loading...