3
Chapter 2 : DVD Maker 2 Quick Installation
The DVD Maker 2 package comes with complete Windows software utilities. These utilities can be found on
the CD-ROM in this package. During installation, it is highly recommended to disable any sub-programs.
These include applications such as antivirus software and system monitoring applications.
1. When you finish the hardware setup, the “Found New
Hardware Wizard” window will pop up. Please click
“Cancel” and you can make use of DVD Maker 2 Quick
Installation for proper installation.
2. Insert the installation CD into the CD ROM device. The
autorun page will appear as the left image. Please choose
“Driver Installation”.
Note: Your DVD Maker 2 device must plug in the USB2.0
port before installation.
3. Please select setup language then choose “OK”.
4. Click “Next” to install the DVD Maker 2 driver.
To Next Page
Loading...
