8
NOTICE:
1. During remounting saw blade, make sure the teeth pointing
downward.
2. The right side of the saw blade need to be in between of the meat
scraper.
3. Make sure the teeth of the blade should be
sitting out on the edge of the pulley.
4. After installing the blade, rotate upper pulley
manually to make sure the blade run smoothly.
Video tutorial can be obtained from KitchenWare Station customer service team via E-mail
MAINTENANCE
IMPORTANT: To maintain the appearance and increase the service life, the following rules must
be abided:
• Disconnect the power cable from the socket when not in use.
• Use a neutral detergent to clean the machine. The pH for a natural detergent should be
at 7 or no higher than 8. A detergent that contains too much acidic or alkaline could
damage the appearance of the machine.
• Never use abrasive products, chlorate substances, wire wools, brushes of any type,
scrapers, etc. to clean the machine.
• Do not lay objects on the machine and make sure that the place of storage is dry, not
humid, dust-free, clean and free from insects or other animals and protected against
bad weather conditions or other agents (for example, atmospheric agents, drops of
water or other liquids, pollution) which might damage it; the place must not be subject
to considerable temperature ranges;
WARNING! The machine must never be washed with pressurized water jets.
WARNING! The machine does not need lubrication or greasing since it is equipped with self-
lubricating bearings.
To Next Page
Loading...