Need help?Do you have a question about the KYMCO AGILITY 125 and is the answer not in the manual?
General| Displacement | 124.6 cc |
|---|---|
| Fuel System | Carburetor |
| Front Suspension | Telescopic Fork |
| Front Brake | Disc |
| Rear Brake | Drum |
| Front Tire | 120/70-12 |
| Rear Tire | 130/70-12 |
| Ignition | CDI |
| Starting System | Electric & Kick |
| Cooling System | Air Cooled |
| Transmission | CVT Automatic |
| Bore x Stroke | 52.4 mm x 57.8 mm |
Important safety and procedural precautions for servicing the motorcycle.
Detailed procedures for carburetor removal, service, and installation.
Step-by-step guide for safely removing the engine from the motorcycle.
Detailed steps for installing the engine, including bracket and mounting bolt procedures.
Procedures for servicing the camshaft, valves, and related components.
Step-by-step instructions for removing and installing the cylinder head.
Detailed procedures for removing the cylinder and piston assembly.
Step-by-step guide for installing the piston and cylinder assembly.
Detailed service procedures for drive pulley, starter pinion, clutch, and driven pulley components.
Procedures for disassembling and inspecting the final reduction gears and bearings.
Steps for replacing bearings and reassembling the final reduction system.
Detailed steps for separating the crankcase halves.
Procedures for inspecting the crankshaft and assembling the crankcase.
Detailed service for the front brake system, including pads, discs, master cylinder, and caliper.
Instructions for servicing the front shock absorbers and front fork assembly.
To Next Page
