KYMCO Agility City 125 User Manual

AGILITY CITY 125
PREFACE
This Service Manual describes the
technical features and servicing
procedures for the KYMCO AGILITY
CITY 125
Section 1 contains the precautions for all
operations stated in this manual. Read
them carefully before starting any
operation.
Section 2 is the removal/installation
procedures for the frame covers which
are subject to higher removal/installation
frequency during maintenance and
servicing operations.
Section 3 describes the inspection/
adjustment procedures, safety rules and
service information for each part, starting
from periodic maintenance.
Sections 6 through 17 give instructions
for disassembly, assembly and inspection
of engine, chassis frame and electrical
equipment.
Most sections start with an assembly or
system illustration and troubleshooting
for the section. The subsequent pages
give detailed procedures for the section.
KWANG YANG MOTOR CO., LTD.
OVERSEAS SALES DEPARTMENT
OVERSEAS SERVICE SECTION
TABLE OF CONTENTS
GENERAL INFORMATION 1
FRAME COVERS/EXHAUST MUFFLER 2
INSPECTION/ADJUSTMENT 3
LUBRICATION SYSTEM 4
FUEL SYSTEM 5
ENGINE REMOVAL/INSTALLATION 6
CYLINDER HEAD/VALVES 7
CYLINDER/PISTON 8
ENGINE
DRIVE AND DRIVEN PULLEYS/KIC
K
STARTER
9
FINAL REDUCTION 10
CRANKCASE/CRANKSHAFT 11
FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
12
CHASSIS
REAR WHEEL /REAR BRAKE /REAR
SUSPENSION
13
BATTERY/CHARGING SYSTEM/A.C.
GENERATOR
14
IGNITION SYSTEM 15
STARTING SYSTEM 16
LIGHTS/INSTRUMENTS/SWITCHES 17
ELECTRICAL EQUIPMEN
T
EXHAUST EMISSION CONTROL
SYSTEM
Our company reserves the right to make
any alteration in the design.The
information and contents included in
this manual may be different from the
motorcycle in case specifications are
changed.
18
Cortesia de / Courtesy of: www.batmotos.com
Recambios KYMCO en www.batmotos.com

KYMCO Agility City 125 Specifications

General

Displacement	124.6 cc
Fuel System	Carburetor
Ignition	CDI
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Wheelbase	1340 mm
Engine Type	4-stroke, SOHC
Starting System	Electric
Frame Type	Steel tube
Length x Width x Height	2050 x 735 x 1210 mm
Rear Tire	120/70-14

Summary

General Information

Specifications

Details technical specifications for the KYMCO AGILITY CITY 125 model.

Service Precautions

Important safety and procedural guidelines for servicing the motorcycle.

Troubleshooting

Offers guidance on diagnosing and resolving common operational issues.

Inspection and Adjustment

Maintenance Schedule

Recommended periodic maintenance tasks and intervals.

Lubrication System

Engine Oil and Oil Filter

Procedures for checking engine oil level and changing oil filter.

Fuel System

Carburetor Removal

Engine Removal and Installation

Engine Removal

Detailed steps for disconnecting and removing the engine from the frame.

Engine Installation

Procedures for reinstalling the engine into the motorcycle frame.

Cylinder Head and Valves

Camshaft Removal

Cylinder and Piston

Cylinder Removal

Drive and Driven Pulleys and Kick Starter

Final Reduction System

Final Reduction Disassembly

Crankcase and Crankshaft

Crankcase Separation

Front Wheel, Front Brake, and Front Suspension

Rear Wheel, Rear Brake, and Rear Suspension

Battery, Charging System, and AC Generator

Battery Service

Ignition System

CDI Unit Inspection

Starting System

Specifications

Starter Motor Service

Lights, Instruments, and Switches

Troubleshooting

Common issues with lights, instruments, and switches.