Name: KYMCO Agility City 125
Brand: KYMCO
Rating: 5 (1 reviews)

To Next Page

To Previous Page

7. CYLINDER HEAD/VALVES

7-3

AGILITY CITY 125

CAMSHAFT REMOVAL

Remove the center cover.

Remove the four cylinder head cover bolts

to remove the cylinder head cover.

Remove the two nuts attaching the

secondary air inlet tube.

Remove the cam chain tensioner cap screw

and the O-ring.

Turn the cam chain tensioner screw

clockwise to tighten it.

Turn the flywheel counterclockwise so that

the “T” mark on the flywheel aligns with

the index mark on the crankcase to bring the

round hole on the camshaft gear facing up

to the top dead center on the compression

stroke.

Cylinder Head Cove

O-ring

Tensioner Screw

Round Hole

Camshaft Gea

Screw

Punch Marks

Cortesia de / Courtesy of: www.batmotos.com

Recambios KYMCO en www.batmotos.com

Questions and Answers:

Need help?

Do you have a question about the KYMCO Agility City 125 and is the answer not in the manual?

KYMCO Agility City 125 Specifications

General