6. CYLINDER HEAD/VALVES
6-4
DOWNTOWN 125i
CYLINDER HEAD COVER
REMOVAL
Remove four bolts then remove the cylinder
head cover.
INSTALLATION
Install a new cylinder head cover O-ring and
install the cylinder head cover.
Install and tighten the cylinder head cover
bolts to the specified torque in a crisscross
pattern.
Torque: 0.8~0.9kgf-m
Be sure to install the O-ring into the
groove properly.
＊
Cortesia de/ Courtesy of: www.batmotos.com
Cortesia de/ Courtesy of: www.batmotos.com
To Next Page
Loading...
Need help?
General