1. GENERAL INFORMATION
1-4
the specified lubrication points.
After reassembly, check all parts for proper
tightening and operation.
When two persons work together, pay attention to
the mutual working safety.
Disconnect the battery negative (-) terminal before
operation.
When using a spanner or other tools, make sure
not to damage the motorcycle surface.
After operation, check all connecting points,
fasteners, and lines for proper connection and
installation.
When connecting the battery, the positive (+)
terminal must be connected first.
After connection, apply grease to the battery
terminals.
Terminal caps shall be installed securely.
If the fuse is burned out, find the cause and repair
it. Replace it with a new one according to the
specified capacity.
To Next Page
Loading...
