Need help?Do you have a question about the KYMCO XCITING 250 and is the answer not in the manual?
General| Front Suspension | Telescopic Fork |
|---|---|
| Front Brake | Single Disc |
| Rear Brake | Single Disc |
| Front Tire | 120/70-15 |
| Rear Tire | 150/70-14 |
| Fuel System | Fuel Injection |
| Max Torque | 22 Nm @ 6500 rpm |
| Transmission | CVT |
Key safety recommendations for riding your scooter safely and responsibly.
Importance of helmets and eye protection for rider safety.
Recommendations for boots, gloves, and appropriate clothing for riding.
Specifies maximum weight capacities for the scooter and its compartments.
Strong advice against removing or modifying original equipment.
Description of the scooter's ignition and shutter keys.
Explanation of the ignition switch functions and key positions.
Controls for turning the headlight and taillight on or off.
Procedure for operating the electric starter motor.
Operation of the turn signal switch for changing direction or lanes.
Location and function of the horn button.
Controls for switching between high and low beam headlights.
Function of the passing light switch for signaling.
How to apply front and rear brakes using the left handlebar lever.
How to apply the front brake using the right handlebar lever.
Instructions for applying the parking brake to lock the rear wheel.
Instructions for releasing the parking brake.
Procedure for opening the fuel filler cap using the ignition key.
Procedure for opening the front small storage box.
Procedure for closing the front small storage box.
How to open the center small storage box using a lever.
How to lock the center small storage box.
Steps to unlock the seat using the ignition key.
Procedure for securing the seat after use.
How to adjust the backrest position for rider comfort.
Procedure for using the cell phone socket and charger.
Instructions for placing the scooter on the center stand.
Description of the side stand and its ignition cut-off system.
Step-by-step guide for starting the scooter's engine.
Importance of warming up the engine to circulate oil before riding.
Procedure for locking the steering to prevent theft.
Guidelines for throttle use during the initial break-in period.
Importance of varying engine speed for proper break-in.
Why constant low speed can be detrimental during break-in.
Benefits of maintaining the scooter for safety, economy, and performance.
Recommended type and viscosity of engine oil for the scooter.
Procedure for changing the transmission oil.
Procedure for removing and replacing the air cleaner element.
How to adjust the throttle grip free play for optimal response.
Procedure for adjusting the engine's idle speed.
How to check the coolant level in the reserve tank.
Guidelines for coolant type and mixture for engine protection.
Checks for side stand spring, assembly, and ignition cut-off system.
How to check the brake fluid level and inspect for wear.
Checks for fluid leaks and condition of hoses and fittings.
How to check and replace worn front brake pads.
How to check and replace worn rear brake pads.
Inspection procedure for the parking brake lever stroke.
Steps for removing and installing the battery.
Recommended tire pressures for solo and two-up riding.
How to inspect tire tread depth and condition for safety.
Steps for washing the scooter, including rinsing and cleaning with a sponge.
Steps for preparing the scooter for extended storage, such as for winter.
To Next Page
