KYMCO X-Town CT250 User Manual

WARNING
To avoid damage from the electronic fuel injection system, do not remove or install the
battery when the ignition switch is in the " " position.
Make sure to keep away from any flammable materials such as dry grasses or leaves,
avoid them in contact with the exhaust pipe or muffler when parking the vehicle.
The long-term storage of the vehicle could cause fuel and engine oil deterioration and
probably get into a non-start situation.
Service more frequently when operating in severe conditions such as dusty area, high
speed riding, frequent start and stop or extreme riding habit.

KYMCO X-Town CT250 Specifications

General

Displacement	249.1 cc
Fuel System	Electronic Fuel Injection
Starting System	Electric
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Rear Tire	150/70-13
Fuel Capacity	10.5 liters
Seat Height	765 mm
Engine Type	4-stroke
Bore x Stroke	72.7 mm x 60 mm
Front Tire	120/70-14

Summary

SECTION 1 - FORWARD & SAFETY INTRODUCTION

SCOOTER SAFETY

SECTION 2 - CONTROLS & FEATURES

IGNITION SWITCH

Explains the functions and positions of the ignition switch.

INSTRUMENTS

Description of various indicators and gauges on the instrument panel.

ABS INDICATOR LIGHT

RIGHT HANDLEBAR SWITCHES

Description of starter, engine stop, and hazard switches on the right handlebar.

LEFT HANDLEBAR SWITCHES

Description of turn signal, horn, dimmer, and passing switches on the left handlebar.

FUEL SYSTEM

BRAKING SYSTEM

Explanation of the Combination Braking System (CBS) operation.

SIDE STAND

SECTION 3 - OPERATION

PRE-RIDE INSPECTION

Essential checks to perform before each ride for safety and proper function.

BREAK-IN

Guidelines for the initial break-in period to ensure vehicle longevity and performance.

STARTING THE ENGINE

Step-by-step procedure for starting the scooter's engine safely.

ABS SYSTEM

Information on the ABS system, its limitations, and safe braking practices.

SECTION 4 - MAINTENANCE

MAINTENANCE SCHEDULE

Overview of the maintenance schedule and service intervals.

ENGINE OIL (X-TOWN CT125)

Recommendations and procedures for engine oil inspection and replacement for CT125.

ENGINE OIL (X-TOWN CT250/300)

Recommendations and procedures for engine oil inspection and replacement for CT250/300.

ENGINE OIL FILTER REPLACEMENT (CT125)

TRANSMISSION GEAR OIL CHANGE (CT125)

TRANSMISSION GEAR OIL CHANGE (CT250/300)

AIR CLEANER FILTER ELEMENT & THROTTLE OPERATION

SPARK PLUG

BRAKE FLUID

BRAKE PAD INSPECTION

BATTERY

FUSE

TIRES AND TIRE PRESSURE

COOLANT