1. GENERAL INFORMATION
1-3
SERVICE PRECAUTIONS
Make sure to install new gaskets, O-rings,
circlips, cotter pins, etc. when reassembling.
When tightening bolts or nuts, begin with larger-
diameter to smaller ones at several times, and
tighten to the specified torque diagonally.
Use genuine parts and lubricants.
When servicing the motorcycle, be sure to use
special tools for removal and installation.
After disassembly, clean removed parts. Lubricate
sliding surfaces with engine oil before
reassembly.
Apply or add designated greases and lubricants to
To Next Page
Loading...
