KYMCO Like 200i User Manual

MAINTENANCE
Transmission fluid change
Place the scooter on its center stand.
1.
Remove the transmission fluid drain bolt .
2.
Remove the transmission fluid filler bolt , then
slowly rotate the rear wheel to drain the fluid.
3.
Fill the transmission with the recommend fluid to
the capacity listed below.
4.
Transmission fluid type: SAE 90
Transmission fluid capacity:
0.20 L
Install the transmission filler bolt and tighten it to
the specified torque.
5.
Transmission fluid filler/drain bolt
torque: 15 lb-ft (20 N-m)
23

KYMCO Like 200i Specifications

General

Transmission	CVT
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Front Tire	110/70-12
Starting System	Electric
Frame	Steel
Fuel System	EFI
Cooling System	Air-cooled
Bore x Stroke	61 mm x 57.8 mm