EasyManua.ls Logo

KYMCO LIKE 50i User Manual

KYMCO LIKE 50i
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WARNI
WARNING
To avoid damage from the electronic fuel injection system, do not remove or install the
battery when the ignition switch is in the " " position.
The long-term storage of the vehicle could cause fuel and engine oil deterioration and
probably get into a non-start situation.
Service more frequently when operating in severe conditions such as dusty area, high
speed riding, frequent start and stop or extreme riding habit.
Make sure to keep away from any flammable materials such as dry grasses or leaves,
avoid them in contact with the exhaust pipe or muffler when parking the vehicle.
Question and Answer IconNeed help?

Do you have a question about the KYMCO LIKE 50i and is the answer not in the manual?

KYMCO LIKE 50i Specifications

General IconGeneral
Displacement49.5 cc
Front SuspensionTelescopic Fork
Bore x Stroke39.0 mm x 41.4 mm
Fuel SystemElectronic Fuel Injection
TransmissionCVT
Frame TypeSteel
Front BrakeDisc
Rear BrakeDrum
Starting SystemElectric Starter, Kick Starter

Summary

Section 1: Forward and Safety Introduction

Scooter Safety Guidelines

Essential safety advice including responsibilities, pre-ride checks, riding in bad weather, and modification warnings.

Protective Riding Gear Recommendations

Details on helmets, eye protection, gloves, boots, and clothing for rider safety.

Location of Parts and Controls Overview

Diagram and list identifying major parts and controls of the scooter.

Section 2: Controls and Features

Ignition Switch Operation

Explains the functions of the ignition switch in various positions: OFF, ON, LOCK, and Seat Lift.

Instrument Panel Overview

Diagram of the instrument panel, showing buttons and indicators.

Instrument Panel Functions

Details the Odometer, Fuel Level, Speedometer, Indicators, and CELP indicator functions.

Right Handlebar Controls

Operation of the starter button and engine stop switch.

Left Handlebar Controls

Operation of turn signal, horn, dimmer, and passing switches.

Section 3: Operation

Pre-Ride Inspection Checklist

Essential checks before riding: engine oil, fuel, brakes, tires, throttle, lights, horn, and steering.

Break-In Period Guidelines

Recommendations for the first 1600km: vary speed, avoid constant low/high throttle, and initial service importance.

Engine Starting Procedure

Steps for starting the engine, including checks and ignition switch operation.

Engine Warm-Up and Post-Start Checks

Instructions for post-start procedures like warming up the engine and allowing oil circulation.

ABS System Operation and Limitations

Explanation of ABS function, braking with ABS, and safety considerations.

Section 4: Maintenance

Maintenance Schedule Overview

Details maintenance tasks, frequency, and odometer intervals, defining service codes (I, C, R, A, L, D, T).

Scheduled Maintenance Items (Part 1)

Covers Air Cleaner, Spark Plug, Throttle, Valve Clearance, Fuel Line, Engine Oil, and Drive Belt maintenance.

Engine Oil Maintenance

Engine Oil Replacement Procedure

Step-by-step guide for changing the engine oil, including draining and refilling.

Transmission Gear Oil Change

Spark Plug Maintenance

Brake System Maintenance

Battery Maintenance

Tire Maintenance

LIKE 150i Specifications

LIKE 50i Specifications

Related product manuals