What to do if KYMCO Mini LS Scooter does not run check battery charge display?
If your KYMCO Scooter doesn't run and the battery charge display is showing a problem, the battery might be discharged. In this case, charge the batteries.
What to do if automatic switch off (overload protection) is active on KYMCO Mini LS Scooter?
If the automatic switch off (overload protection) is active on your KYMCO Scooter, switch the scooter off, and then switch it on again after a few seconds to allow the unit to reset.
What to do if KYMCO Mini LS batteries are defective?
If the batteries of your KYMCO Scooter are defective, replace them with the help of your dealer.
What to do if drive lever pressed while switching on KYMCO Mini LS?
If the drive lever is pressed while switching on your KYMCO Scooter, release the drive lever.
What to do if fault on drive lever of KYMCO Scooter?
If there is a fault on the drive lever of your KYMCO Scooter, visit your dealer.
Instructions for safe and proper use of the motorised electric scooter for outdoor mobility.
Welcome and overview of the Mini LS scooter and its operating manual.
Crucial safety warnings and precautions for operating the scooter, including user responsibility and alertness.
Identification of key components and features of the Mini LS scooter.
Detailed technical specifications and measurements for the Mini LS scooter.
Instructions on how to safely push and transport the scooter, including disassembly.
Procedures for adjusting the seat and tiller for comfortable and safe operation.
Guidelines and steps for operating the scooter, including controls and safety tips.
Information on battery status, charging procedures, and error codes for the scooter.
To Next Page
General
