KYMCO Mini LS User Manual

OPERATING THE SCOOTER
Check before you power on the scooter:
Ensure your scooter is in
drive mode (not in
“freewheel” mode)
Check the “freewheel”
mode lever is in the
pushed down position
Seat is locked into the
desirable position
Move the seat forwards
and backwards to ensure
it is stationary.
Are the batteries charged?
Check the dashboard to
verify the charging status
of the batteries
Are the brakes working?
Check by driving slowly
and stopping again
Are the tires and wheels
undamaged and is the air
pressure correct?
Visual check of tires and
wheels
8.1 POWERING ON/OFF
The switch is located near the right side
of the dashboard.
Insert the key into the switch and turn
it to the right to power on the scooter.
Turn it to the left to power off the
scooter.
8.2 ADJUSTING THE SPEED
Use the two speed
adjustment mechanisms
to adjust the speed to suit your
driving conditions.
Always use lower speed if you
are uncertain about the driving
conditions.
There is one mechanism to
control the speed of your scooter.
Speed Control Dial:
It is located in the center of the dashboard.
23

KYMCO Mini LS Specifications

General

Brand	KYMCO
Model	Mini LS
Category	Scooter
Language	English