KYMCO MXU 250 - Steering Column Service

14. FRONT WHEEL/FRONT SUSPENSION/
STEERING SYSTEM
14-21
MXU 300/250
Install the throttle unit by aligning the upper
holder lip with the mark in the handlebar
and then install the lower holder and tighten
the two screws.
STEERING COLUMN
REMOVAL AND INSPECTION
Remove handlebar. (
page
14-18)
Remove the two bolts and remove the cable
holder, steering brackets and dust seal.
Mark
Upper Holder Lip
Bolts
Steering Bracke
t
Steering Bracke
t
Dust Seal