What to do if the ignition is wet and there's no spark in my KYMCO MXU 500 Offroad Vehicle?
If the ignition is wet and there's no spark in your KYMCO Offroad Vehicle, wipe the ignition clean with a dry cloth. If the problem persists, adjust the plug gap or replace the plug.
How to fix water or dirt mixed in fuel of my KYMCO MXU 500 Offroad Vehicle?
If your KYMCO Offroad Vehicle has water or dirt mixed in the fuel, clean the filter element and fuel tank.
What to do if my KYMCO MXU 500 has a weak spark?
If the spark is weak, try the following: First, wipe the spark plug clean with a dry cloth. If that doesn't work, adjust the plug gap or replace the plug. Ensure the plug cap is securely attached and grounded to the chassis. You can also use the electric starter.
What to do if my KYMCO MXU 500 engine turns over slowly?
If the engine turns over slowly, check the fluid, recharge if necessary, and verify the connections. You can also try using the electric starter.
What to do if my KYMCO Offroad Vehicle has no fuel?
If there is no fuel in your KYMCO Offroad Vehicle, supply fuel.
What to do if my KYMCO MXU 500 Offroad Vehicle has water or dirt mixed in fuel?
If there is water or dirt mixed in the fuel of your KYMCO Offroad Vehicle, clean the filter element and fuel tank.
General| Brand | KYMCO |
|---|---|
| Model | MXU 500 |
| Category | Offroad Vehicle |
| Language | English |
To Next Page
