FINAL GEAR OIL
Change the oil in the final gear case when specified by the Maintenance Schedule. Change the oil
with the final gear case warm, and the ATV on level ground to assure complete and rapid draining.
Final gear oil replacement
1. Remove the two bolts (1) on the skid plate (2) right/left side and two bolts (3) under the skid
plate, remove skid plate.
2. To drain the oil, first place an oil drain pan under the oil drain plug (4).
(1) Bolts (on the skid plate)
(2) Skid plate
(3) Bolts (under the skid plate)
(1)
113
(4) Oil drain plug
(4)
(1)
(3)
(2)
To Next Page
