EasyManua.ls Logo

KYMCO MXU 500 - Hazard Switch

KYMCO MXU 500
664 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hazard switch
When the hazard switch is pressed, the right and
left turn signal lights flash together.
When the hazard switch is pressed again, the
left turn signal lights go out together.
The
instrument turn signal indicator light will also
flash when the switch is operated.
right and
(1) Hazard switch
(1)
29
CAUTION:
Turn on this switch when parking or there is
a special condition.
After the hazard switch is turned on, it will
not reset automatically. Be sure to reset it
after use to avoid affecting the traffic safety.
When the signal lights are flashing , the
hazard switch does not work.
When the ignition switch is "OFF" , the
hazard light will still work.

Table of Contents

Other manuals for KYMCO MXU 500

Related product manuals