KYMCO MXU 500 - Control Functions; Control Functions Ignition Switch

(2)
OFF
ON
(1)
CONTROL FUNCTIONS
17
(1) Ignition switch (2) Key
IGNITION SWITCH
ON :
Functions of the respective switch positions
are as follows:
The key can not be removed.
The engine can be started.
OFF:
"“:
All electrical circuits are switched off except
hazard light. The key can be removed in this
position.
All electrical circuits are switched on.
The ignition switch is ON while the position
light and taillight will light.
All electrical circuits are switched on.
The engine can be started.
The key can not be removed.