KYMCO MXU 500 - Right Handlebar Switch; 2 WD;4 WD Select Switch

(1) 2WD/4WD select switch
RIGHT HANDLEBAR SWITCH
2WD/4WD select switch
This ATV is equipped with a 2WD/4WD select
switch, which permits a choice between the
“2WD” and “4WD” drive modes. Select a drive
mode that is suitable for your riding.
The 2WD/4WD select switch is located above
the throttle lever. To select the drive mode,
push the 2WD/4WD select switch to the
desired position.
To check your present drive mode, look at the
Multi-function display.
(1)
31
AB
TRIPODO
mile
km
PM
2WD
AB
TRIPODO
mile
km
PM
4WD
2WD mode2WD mode
4WD mode4WD mode
Multi-funtion displayMulti-funtion display