11.FINAL REDUCTION/
TRANSMISSION SYSTEM
11-10
MXU 500
RIGHT CRANKCASE
REMOVAL/INSTALLATION
REMOVAL
Remove the cam chain (refer to the “CAM
CHAIN REMOVAL/INSPECTION/
INSTALLATION” section in the chapter 8)
Remove the secondary drive and driven bevel
gear (refer to the “SECONDARY
DRIVE/DRIVEN BEVEL GEAR
REMOVAL/INSPECTION/
INSTALLATION” section in this chapter).
Remove the stopper plug and washer.
Remove the spring and shift cam stopper.
Remove the four bolts from left crankcase.
Stopper Plug
Spring
Stoppe
To Next Page
Loading...
