8. CYLINDER HEAD/VALVES
8-24
MXU 500
CYLINDER HEAD
DISASSEMBLY/INSPECTION/
ASSEMBLY
Remove the cylinder head (refer to the
“CYLINDER HEAD
REMOVAL/INSTALLATION” section in
this chapter).
Remove the valve spring cotters, retainers,
springs, spring seats, oil seals and valves
using a valve spring compressor.
Special tool:
Valve Spring Compressor A120E00040
xBe sure to compress the valve springs
with a valve spring compressor.
xMark all disassembled parts to ensure
correct reassembly.
＊
Valve Spring Compresso
To Next Page
