KYMCO MXU 500 - Special Tools

1. GENERAL INFORMATION
1-15
MXU 500
SPECIAL TOOLS
Tool Name Tool No.
Illustration
(Note: the special tools may differ
slightly from those shown in the
figure of this manual.)
Oil seal and bearing
installer
A120E00014
Valve adjuster
(Refer to the “VALVE
CLEARANCE” section in the
chapter 3.)
A120E00036
Bearing puller A120E00037
Valve spring compressor
(Refer to the “CYLINDER HEAD
DISASSEMBLY/INSPECTION/
ASSEMBLY” section in the
cha
p
ter 8.
)
A120E00040
Universal holder
(Refer to the “DRIVE PULLEY,
DRIVE V-BELT AND DRIVEN
PULLEYREMOVAL/
INSPECTION/
INSTALLATION” section and
“CLUTCH REMOVAL/
INSTALLATION” section in the
chapter 10.)
A120E00056
Drive pulley holder
(Refer to the “DRIVE PULLEY,
DRIVE V-BELT AND DRIVEN
PULLEYREMOVAL/
INSPECTION/
INSTALLATION” section in the
chapter 10.)
A120E00058
(Cont’d)