15. REAR WHEEL/AXLE/SUSPENSION/
DRIVING MECHANISM
15-28
MXU 300/250
Change the right side shim an equal
thickness and opposite amount of what the
left side shim was changed; if the left shim
was replaced with a 0.03 mm (0.0012 in)
thicker shim, replace the right shim with
one that is 0.03 mm (0.0012 in) thinner.
FINAL GEAR CASE DISASSEMBLY
Check the oil seal for wear or damage;
replace it if necessary.
Remove the cover bolts in a crisscross
pattern in several steps.
Oil Seal
Bolts
To Next Page
