To Next PageTo Next Page
Need help?Do you have a question about the KYMCO MXU 700i LE EURO and is the answer not in the manual?
General| Brand | KYMCO |
|---|---|
| Model | MXU 700i LE EURO |
| Category | Offroad Vehicle |
| Language | English |
Details the vehicle's compliance with the American National Standard for Four Wheel All-Terrain Vehicles.
Illustrates various warning labels on the ATV, detailing safety precautions and restrictions for operation.
Emphasizes that ATVs are hazardous and require proper training, age adherence, and protective gear.
Details practices like avoiding stunts, proper posture, careful terrain handling, and avoiding alcohol/drugs.
Covers warnings for operating on hills, rough terrain, and in water, along with load capacity.
Shows the location of the key identification number stamped on the key or tag for reference.
Illustrates the location of the engine serial number stamped on the left crankcase.
Indicates the location of the frame number stamped on the right side of the vehicle.
Diagrams showing the location of various parts like lights, cargo racks, and accessories.
Explains the functions of the ignition switch in OFF and ON positions for vehicle operation.
Details the dashboard layout, including buttons, tachometer, and various indicator lights.
Describes the function of the headlight dimmer and engine stop switches on the left handlebar.
Explains the 2WD/4WD select and differential lock switches located on the right handlebar.
Details how the thumb-operated throttle lever controls speed and its proper function.
Explains the operation of front and rear brake levers and the combined brake pedal.
Describes how to set and release the front and rear parking brakes for secure parking.
Details how to use the drive select lever to shift between Low, High, Neutral, Reverse, and Park.
Ensures the drive select lever is properly engaged in neutral before starting the engine.
Advises checking brake fluid, levers, and pedal for proper operation and feel.
Instructs to fill the fuel tank with unleaded fuel and check for leaks before operation.
Guides on checking engine oil level and for any signs of leakage.
Covers checking tire condition, wear limits, and setting correct cold tire pressures.
Explains how to check the coolant level in the reservoir and when to add coolant.
Provides step-by-step instructions for starting a cold engine, including throttle and ignition use.
Briefly refers to cold engine starting procedures, emphasizing slight throttle opening for warm starts.
Details shifting procedures between gears like Neutral, High, Low, Reverse, and Park.
Outlines the recommended break-in period for the engine to ensure longevity and performance.
Instructs on proper parking procedures, including engine stop, park position, and parking brake application.
Provides guidelines on maximum load capacities for racks and towing, emphasizing safe weight distribution.
Encourages familiarization with controls and safety information before riding for recreational use.
Stresses the need for training, practice, and developing skills for safe ATV operation.
Advises against operation by children under 16, especially on ATVs with engine sizes over 90cc.
Mandates wearing approved helmets, eye protection, gloves, boots, and suitable clothing for safety.
Warns against operating at speeds exceeding skills or conditions, recommending speed limiter use.
Explains proper turning procedures, emphasizing lean, speed control, and avoiding sharp turns.
Provides techniques for safe uphill riding, including weight transfer and avoiding steep or slippery slopes.
Details the contents of the tool kit stored under the seat and its suitability for routine repairs.
Provides a detailed schedule for routine inspections, adjustments, and lubrication based on mileage/time.
Guides on checking engine oil level, replacement procedures, and oil filter cleaning and quantity.
Details procedures for changing oil in the rear and front gear boxes, including oil types and quantities.
Explains how to inspect the spark plug, check its gap, and proper installation torque.
Covers battery location, handling precautions, and procedures for removal and installation.
Details the procedure for replacing fuses, emphasizing using the correct rating to prevent system damage.
Provides a chart to diagnose common operational issues like fuel, battery, ignition, and compression problems.
Provides instructions on washing the ATV, emphasizing avoiding high-pressure water and protecting components.
Outlines steps for extended storage, including oil change, fuel draining, and battery care.
Lists detailed technical specifications for the ATV, including dimensions, engine, and fluid capacities.
Highlights prohibited acts related to tampering with noise control systems, like exhaust and intake.
