KYMCO PEOPLE S 125 Service Manual

10. FINAL REDUCTION
10-6
PEOPLE S 4T
Install the transmission case cover.
Install and tighten the transmission case
cover bolts.
Install the clutch/driven pulley. (
Ö
9-13)
Install the rear wheel. (
Ö
13-3)
Install the rear brake cable. (
Ö
13-5)
After installation, fill the transmission case
with the specified oil. (
Ö
3-7)
Specified Gear Oil:
KYMCO SIGMA GEAR OIL SAE 90#
Oil Capacity:
At disassembly : 0.21 liter, 50cc 0.12liter
At change : 0.181 liter, 50cc 0.09liter
Install and tighten the oil check bolt.
Torque: 1.0～1.5kg-m
Start the engine and check for oil leaks.
Check the oil level from the oil check bolt hole
and add the specified oil to the proper level if
the oil level is low.
Drain Bolt
Transmission Case Cove
r
Oil Check Bolt Hole/Oil Fille
r
Bolts
• Place the motorcycle on its main
stand on level ground.
• Check the oil sealing washer for wear
or damage.
＊

KYMCO PEOPLE S 125 Specifications

General

Displacement	124.6 cc
Front Suspension	Telescopic Fork
Cooling System	Air Cooled
Max Torque	10.4 Nm @ 6500 rpm
Transmission	CVT
Front Brake	Disc