KYMCO PEOPLE S 125 Service Manual

Name: KYMCO PEOPLE S 125
Brand: KYMCO
Rating: 4 (1 reviews)

196 pages

To Next Page

To Previous Page

3. INSPECTION/ADJUSTMENT

3-4

PEOPLE S 4T

AIR CLEANER

AIR CLEANER REPLACEMENT

Remove the rear side covers. (

Remove the six air cleaner case cover screws

and the cover.

Remove the air cleaner element by removing

the three screws.

Check the element and replace it if it is ex-

cessively dirty or damaged.

CHANGE INTERVAL

More frequent replacement is required when

riding in unusually dusty or rainy areas.

SPARK PLUG

Remove the spark plug.

Check the spark plug for wear and fouling

deposits.

Clean any fouling deposits with a spark plug

cleaner or a wire brush.

Specified Spark Plug:NGK C7HSA

Measure the spark plug gap.

Spark Plug Gap: 0.6～0.7mm

Cracks

Damage

• The air cleaner element has a viscous

type paper element. Do not clean it

with compressed air.

• Be sure to install the air cleaner ele-

ment and cover securely.

＊

When installing, first screw in the spark

plug by hand and then tighten it with a

spark plug wrench.

＊

Screws

ir Cleaner Case Cove

ir Cleaner Element

Washer De-

formation

Screws

Gap, Wear, and

Fouling Deposits

Other manuals for KYMCO PEOPLE S 125

Owner's Manual64 pages

Manual61 pages

Questions and Answers:

H
Heather PhillipsJul 26, 2025
What to do if my KYMCO PEOPLE S 125 engine will not start?
- D
  Debbie McgeeJul 26, 2025
  If your KYMCO Scooter engine won't start or is hard to start, begin by checking if fuel is reaching the carburetor. You can do this by loosening the drain screw. If fuel is not the issue, remove the spark plug, install it into the spark plug cap, and test for a spark by connecting it to the engine ground. As an additional step, test the cylinder compression.