KYMCO PEOPLE S 125 Service Manual

Name: KYMCO PEOPLE S 125
Brand: KYMCO
Rating: 4 (1 reviews)

196 pages

To Next Page

To Previous Page

1. GENERAL INFORMATION

1-25

PEOPLE S 4T

NO SPARK AT SPARK PLUG

Faulty spark plug

Loose spark plug cap

Poorly connected coupler

Faulty ignition switch

Weak battery

Faulty pulser coil

Faulty ignition coil

Faulty charging system

Broken wire harness

Poorly connected coupler

cFaulty CDI unit

cFaulty ignition coil

Replace with a new

spark plug and inspect

again

Check CDI unit coupler

for looseness

Inspection/Adjustment Symptom

Probable Cause

Normal

Abnormal

Normal

Abnormal

Measure resistance

between terminals of

CDI unit coupler

Check related parts

Check ignition coil with

the CDI unit tester

Weak or no spark

Not loose

Good spark

Loose

Normal

Abnormal

Check spark plug cap

and high-tension wire

for looseness

Check CDI unit with the

CDI unit tester

Other manuals for KYMCO PEOPLE S 125

Owner's Manual64 pages

Manual61 pages

Questions and Answers:

H
Heather PhillipsJul 26, 2025
What to do if my KYMCO PEOPLE S 125 engine will not start?
- D
  Debbie McgeeJul 26, 2025
  If your KYMCO Scooter engine won't start or is hard to start, begin by checking if fuel is reaching the carburetor. You can do this by loosening the drain screw. If fuel is not the issue, remove the spark plug, install it into the spark plug cap, and test for a spark by connecting it to the engine ground. As an additional step, test the cylinder compression.