Need help?Do you have a question about the KYMCO Quannon 125 and is the answer not in the manual?
General| Displacement | 124.1 cc |
|---|---|
| Cooling System | Air-cooled |
| Fuel System | Carburetor |
| Transmission | 5-speed |
| Front Suspension | Telescopic fork |
| Front Brake | Disc |
| Seat Height | 780 mm |
| Rear Brake | Disc |
| Rear Suspension | Mono shock |
Shows where the frame serial number is located on the motorcycle.
Indicates where the engine number is stamped on the engine case.
Records the key number for ordering replacement parts.
Details on wearing comfortable and appropriate clothing for safe motorcycle riding.
Warnings about loose clothing, touching hot parts, and parking near inflammables.
Explains how sitting position affects safety and how to lean during turns.
Guidance on carrying goods, handlebar feel, and avoiding overload.
Labels and identifies various parts of the motorcycle.
Identifies rear components like taillight, exhaust, and brake pedal.
Explains the functions of the ignition switch and how to lock the handlebar.
How to use the electric starter button safely and precautions.
Details the different positions of the headlight switch and their effects.
Explains the engine stop switch for temporary stopping and cautions.
How to use the passing light switch to warn other vehicles.
How to switch between high and low beams for visibility.
How to operate the turn signal switch and the importance of resetting it.
How to use the horn and its dependency on the ignition switch.
How to use the helmet buckle and a safety caution.
Location of the tool box and its maximum loading capacity.
Explains the speedometer (mph/kmh) and fuel gauge functions.
Describes various indicator lights like side stand, neutral, turn signals, and high beam.
Details the functions of the multi-function display, including speed and units.
Explains how to view and select Odometer, Tripmeter, and Oil service meter displays.
Step-by-step instructions for resetting the tripmeter and oil service meter.
Explains the fuel gauge display and how to adjust the digital clock.
Detailed steps for setting the hour and minute on the digital clock.
Emphasizes the necessity of pre-ride checks for safety and preventing damage.
Instructions for checking and refilling engine oil using the sighthole.
How to check brake performance and lever free play.
Steps for checking tire pressure and ensuring it's within normal limits.
Inspecting tires for cracks, wear, foreign objects, and tread depth.
How to check fuel level and refill the tank with correct gasoline.
Checking the steering handlebar for damage and smooth rotation.
Checking brake shoe wear and brake fluid if abnormal free play is found.
Checking the functionality of the horn, headlight, taillight, and turn signals.
Checking drive chain slack and adjusting it, with related brake adjustment.
Checking and adjusting the clutch lever free play to avoid damage.
Details on adjusting clutch lever free play using minor and major adjustment nuts.
Checking the condition of front and rear shock absorbers.
Ensuring the braking effect is good by applying brakes and moving the motorcycle.
Checking rearview mirror angle and license plate condition.
Verifying previous repairs and checking lubrication points.
Step-by-step guide for starting the engine from a cold state.
Procedures for starting the engine when it is already warm.
Refers to Section 5 for starting the engine before riding.
Steps for safely moving off the side stand.
Guidance on maintaining an upright and stable riding posture.
How to engage the clutch and throttle to start moving smoothly.
Advice on signaling, lane keeping, and avoiding sudden movements.
How to control speed using the throttle and proper braking techniques.
Tips for prolonging engine life, especially for new motorcycles.
Correct method for applying both brakes for safe stopping.
Warnings against sudden maneuvers that can cause slips.
Precautions for reduced grip and increased braking distance in wet conditions.
How to signal and stop safely when approaching a parking spot.
Procedures for turning off the ignition switch after stopping.
How to park the motorcycle safely on its side stand.
How to lock the handlebar and take the key for theft prevention.
Steps for inspecting, cleaning, and replacing the air cleaner element.
How to clean the air cleaner element and important cautions.
Tips for cleaning the motorcycle's exterior and waxing precautions.
How to maintain the battery and important safety precautions during handling.
Steps for checking and replacing fuses, including safety precautions.
Instructions on using fuse clips correctly and avoiding contact issues.
Detailed steps for changing engine oil, including oil type and capacity.
How to inspect, clean, and replace spark plugs, including gap settings.
How to check and refill brake fluid, with brand mixing cautions.
Checking rubber covers on connectors for proper installation and cleaning.
Troubleshooting steps for engine failure to start or stop during riding.
Advice on seeking professional inspection for any riding trouble.
A schedule outlining periodic inspections and maintenance items.
To Next Page
