Kyocera Mita KM-1510 - User Manual

Questions and Answers

N
Nicole FletcherAug 7, 2025
Why do my copies come out blank on my Kyocera Mita All in One Printer?
- J
  Jay MarshallAug 7, 2025
  If copies from your Kyocera Mita All in One Printer are coming out blank, several factors could be at play: * Ensure originals are placed correctly. When using the platen, the original should be face-down. If using the DF (18 ppm copier), place originals face-up; for a 15 ppm copier, place them face-down. * Check the exposure settings. If the copier is in auto exposure mode, perform an auto exposure adjustment to change the overall exposure. If in Photo, Text & Photo, or Text mode, adjust the exposure using the copy exposure adjustment keys or perform the exposure adjustment for each mode. * Lastly, check the toner levels. If the Add Toner indicator is lit, replace the toner container.
D
Diana GarrettAug 11, 2025
How to lighten copies on my Kyocera Mita All in One Printer when they come out too dark?
- J
  Jessica RodriguezAug 11, 2025
  If copies from your Kyocera Mita All in One Printer are too dark, the issue might stem from the exposure settings. If the copier is in auto exposure mode, try performing an auto exposure adjustment to lighten the overall exposure. Alternatively, if the copier is in Photo, Text & Photo, or Text mode, adjust the exposure to the correct degree using the copy exposure adjustment keys or perform the exposure adjustment for each mode.
K
Kenneth LunaAug 15, 2025
What to do if my Kyocera Mita All in One Printer keeps misfeeding?
- C
  Christopher SmithAug 15, 2025
  If misfeeds occur frequently with your Kyocera Mita All in One Printer, consider the following: * Ensure the paper is set correctly in the drawer(s). * Replace any curled, folded, or wrinkled paper with new paper. * Remove any misfed paper or loose scraps of paper remaining inside the copier. * Verify that the set paper size matches the size of the paper being used; adjust the setting or use paper of the set size if necessary.
S
Seth IngramAug 20, 2025
How to fix dirty copies from my Kyocera Mita All in One Printer?
- X
  Xavier JohnsonAug 20, 2025
  If your Kyocera Mita All in One Printer produces dirty copies, the platen or DF might be dirty. Clean the platen and/or the DF. You can also try opening the front cover, pulling out, and then pushing back in the cleaning shaft.
S
Stephen SanchezAug 25, 2025
Why is the copy image askew on my Kyocera Mita All in One Printer?
- P
  Patrick CunninghamAug 25, 2025
  If the copy image from your Kyocera Mita All in One Printer is askew, check the original's placement. When using the platen, align a corner of the original with the rear left corner. When using the DF (18 ppm copier), adjust the original insertion guides to the original size. For a 15 ppm copier, align the original to the rear of the DF. If the issue persists with the DF, try making copies by placing originals on the platen.
L
Lisa MillerAug 28, 2025
What to do if the Add Toner indicator stays on after replacing toner in my Kyocera Mita All in One Printer?
- E
  elizabethharrisAug 28, 2025
  If the Add Toner indicator on your Kyocera Mita All in One Printer doesn't turn off after you've added toner, try shaking the new toner container again to ensure it's properly distributed.
G
gomezkatelynSep 2, 2025
How to troubleshoot a Kyocera Mita All in One Printer if nothing lights up?
- M
  Maria KimSep 2, 2025
  If nothing lights up on the operation panel of your Kyocera Mita All in One Printer when you turn on the main switch, make sure the plug is securely connected to an AC outlet.

Kyocera Mita KM-1510 Specifications

General

Function	Copier
Copy Speed	15 ppm
Resolution	600 x 600 dpi
Max Paper Size	A3
Paper Capacity	250 sheets
Zoom	50-200%
Original Size	A4
Paper Weight	60 - 105 g/m²
Multiple Copies	1-99 copies