Kyocera DE-9100 - Page 339

6-9
Machine transportation after setup > Procedure for the main unit transportation (floor to floor)
[CONFIDENTIAL]
7
Attach the exit tray [A] to the main unit hooking up two (front and rear) hooks [B] of
the exit tray [A].
8
Open the cleaning liquid tank cover [B] by the rotating lock lever [A] in the direction
of the arrow.
IMPORTANT
When attaching the side registration guide [A], be careful of the positioning hole [B] and the screw position [C].
The mounting angle of the side registration guide [A] changes.
In case of installing it in wrong position, Right Exit Tray Full Sensor will make mis-detection.
[A]
[C]
[B]
[A]
[C]
[B]
OK NG
[A]
[B]