Kyocera DE-9100 - Page 340

6-10
Machine transportation after setup > Procedure for the main unit transportation (floor to floor)
[CONFIDENTIAL]
9
Insert the cleaning liquid tank [A] in the direction of the arrow until it stops.
10
Remove the cap [A] and reattach the spacer [B].
11
Close the cap [A] again.
12
Close the cleaning liquid tank cover [A] and lock by rotating the lock lever [B].
IMPORTANT
Do not tighten the cap but just put on.
[A]
[A] [A][B]
[A]
[B]