5-29
Operation on the Machine > WSD Scan
Executing WSD scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
1
[Home] key > [Send]
2
Place the originals.
3
Display the screen.
In the destination screen for sending, select [+] > [WSD Scan]
4
Scan the originals.
Procedure using this machine
1 [From Operation Panel] > [Next]
2 Select the destination computer > [OK]
Select [Reload] to reload the computer list.
You can view information on the selected computer by selecting [ ] (information icon).
3 Set the type of original, file format, etc., as desired.
4 Press the [Start] key.
Sending begins and the software installed on the computer is activated.
Procedure from Your Computer
1 [From Computer] > [Start]
2 Use the software installed on the computer to send the images.
• When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (Client) (page 8-55)
• To use WSD Scan, confirm that the computer used for WSD scanning and the machine is network-connected,
and " WSD Scan" is set to [On] in the network settings.
WSD Scan (page 8-32)
• For information on operating the computer, refer to the computer's help or the operation guide of your
software.
Loading Originals (page 5-2)
To Next Page
Loading...
